![background image](http://html1.mh-extra.com/html/quantum/dlt1-vs80-scsi/dlt1-vs80-scsi_interface-manual_770515159.webp)
DLT1/VS80 SCSI Interface Guide
81-81276-01 Rev A01
July 2004
4-117
Due to power cycle, code update, and data cartridge loaded conditions, it is possible to get multiple
check conditions on a TEST UNIT READY command.
Figure 4-75.
TEST UNIT READY (00h) Command Descriptor Block — Data Format
4.24 VERIFY (13h)
The VERIFY command tells the tape drive to verify one or more blocks beginning with the next block
on the medium. VERIFY validates both CRC and ECCs.
Figure 4-76.
VERIFY (13h) Command Descriptor Block — Data Format
Bit
Byte
7
6
5
4
3
2
1
0
0
Operation Code (00h)
1
Logical Unit Number
Reserved
2 – 4
Reserved
5
Unused
Reserved
Flag
Link
Bit
Byte
7
6
5
4
3
2
1
0
0
Operation Code (13h)
1
Logical Unit Number
Reserved
Immed
BC
Fixed
2 – 4
(MSB)
Verification Length
(LSB)
5
Unused
Reserved
Flag
Link
Table 4-69.
VERIFY (13h) Command Descriptor Block — Field Descriptions
Field Name
Description
LUN
Logical Unit Number. The target ignores this field. Only an IDENTIFY message
can change the LUN.
Immed
Immediate. When set, the VERIFY command completes before any media
movement takes place, that is, when processing has been initiated.
Summary of Contents for DLT1/VS80 SCSI
