Quantum DLT1/VS80 SCSI, Interface Manual

Page: 105 / 182

DLT1/VS80 SCSI Interface Guide
81-81276-01 Rev A01 July 2004 4-63
LdrCycleReset ASCll
Binary
0 1 When set, causes the first cartridge to be
loaded if unloading the last cartridge when
the loader product is operated in sequential
mode.
LoaderLUN ASCll
Decimal
1 1 LUN to report media loader device on. Valid
values are 1 - 7.
LongXportPage ASCll
Binary
1 1 When set, reports medium transport element
status descriptor (6 bytes or 18 bytes) .
NoDeferRcvdErr ASCll
Binary
0 1 When set, the tape drive reports a deferred
recovered error as current recovered error.
NoDisconFxdBlk ASCll
Binary
1 1 When set to 0, turn off feature of not to
disconnect on every fixed block data
transfer. When set to 1, turns on this feature.
NoRdyUAOnUnld ASCll
Binary
0 1 When set, removes Not Ready to Ready
Unit Attention from the Unit Attention
queue upon a successful unload.
PerfMode ASCll
Binary
1 1 When set to 0, the tape drive is tuned for
capacity.
When set to 1, the tape drive is tuned for
performance.
ProtectDirOnWp ASCll
Binary
0 1 When set, protects tape directory if the
cartridge write-protect switch is in write
protect position.
RedundancyMode ASCll
Decimal
1 1 Sets the value of the allowed maximum
marginal channel (0-3 allowed).
RepBusyInProg ASCll
Binary
0 1 When set to 1, reports BUSY status if the
tape drive is in the process of becoming
ready.
ReportRcvdPErrs ASCll
Binary
1 1 When set, reports recovered error if parity
error has been retried successfully.
ReportRcvRdErr ASCll
Binary
0 1 Sets the default value of PER bit of Read /
Write Error Recovery Mode page (01h).
Table 4-37.
MODE SELECT EEPROM Vendor Unique Page — Parameter Descriptions
Name Value Rep Default
Length
(Bytes) Usage