DLT1/VS80 SCSI Interface Guide
81-81276-01 Rev A01
July 2004
4-19
4.7.3 LOG SELECT Page Format
Each Log page begins with a 4-byte header followed by
n
number of log parameter blocks, one block
for each parameter code. Each block, except for parameter code 05h, is 8 bytes. The parameter block
for code 05h is 12 bytes.
Figure 4-12.
LOG SELECT Log Page Header — Data Format
Bit
Byte
7
6
5
4
3
2
1
0
0
Reserved
Page Code
1
Reserved
2 - 3
(MSB)
Page Length
(LSB)
Table 4-11.
LOG SELECT Log Page Header — Field Descriptions
Field Name
Description
Page Code
The Page Code specifies which Log Page this LOG SELECT command affects.
Page Length
The Page Length specifies the total number of bytes contained in this Log Page,
not including the four bytes of the header.
Summary of Contents for DLT1/VS80 SCSI
