![background image](http://html1.mh-extra.com/html/quantum/dlt1-vs80-scsi/dlt1-vs80-scsi_interface-manual_770515049.webp)
DLT1/VS80 SCSI Interface Guide
81-81276-01 Rev A01
July 2004
4-7
Byte 7
RelAdr. Set to 0
WBus32. Set to 0 (The tape drive does not support 32-bit
transfer.)
WBus16. Set to 1 (The tape drive supports 16-bit wide data
transfers.)
Sync. Set to 1 (The tape drive supports Synchronous Data
Transfer/
Linked. Set to 1 (The tape drive supports Linked commands.)
CmdQu. Set to 0
SftRes. Set to 0
Vendor Identification
“QUANTUM”
Product Identification
“VS80 ”
Product Revision Level
This field contains four bytes of ASCII data that define the product's software
Revision Levels. The first two bytes are the version number of servo code. In
Quantum products, this firmware is located in an EEPROM and is field
updateable. The second two bytes are the version number of the SCSI/read/write
code. When a firmware update is performed on the tape drive, this part of the
Revision Level field changes appropriately.
Vendor Specific
See
“Vendor Unique Inquiry Bytes” on page 4-9
Table 4-4.
Standard Inquiry Data Page — Field Descriptions
(Continued)
Field Name
Description
Summary of Contents for DLT1/VS80 SCSI
