QuantAsylum QA401 User
’s
Manual
Page
28
Tracking Markers
Tracking markers are not in the current release.
Acquisition Control
The acquisition settings determine the resolution of your capture, and also how much filtering is
performed.
The resolution knob can be adjusted to show the level of detail you require. More detail takes more
time to capture. The averaging knob determines how many samples are averaged when the display
values are co
mputed. Note that averaging doesn’t change the noise floor, but it does make it easier to
see signals that might be buried in noise. Since long averaging can delay the time it takes to see changes,
there is a reset button. This is helpful if, for example, you change the input frequency. In this case, you
can push the Reset button and immediate see the new average get built. Without this, you’d have to
wait to see the old signal average decay away.
As you adjust the resolution and averaging, the parameters below are updated in the display.
