QuantAsylum QA401 User
’s
Manual
Page
59
Note you should s
ee the characters “16C0”
and “4E22”
as shown in the text above. Once you have
confirmed this, you can move to manually install the driver. Here, you want to tell Windows to let you
pick the driver, and point it to the USB Driver directory of the installed location. At this point, the driver
should install itself.
Step #3: Run the application and confirm it can connect
At this point, you have confirmed the drivers have been correctly installed, and you can see the Analyzer
appearing in the device manager as shown below.
Now, start the QA401 application. You should hear the USB connect indications, followed by an
indication from the Analyzer Application that it has connected to the hardware. If this does not occur,
