QuantAsylum QA401 User
’s
Manual
Page
18
The
time
button displays the transmitted and captured waveforms in the time domain. With the time
and input button pressed, we can see what was captured by the analyzer. Sometimes you can forget
that you are looking at the output data. The output data is exceptionally clean and might confuse you
into thinking that you are looking at test data from the device under test. For this reason, when you
have selected to look at the output data, you will be reminded with an on-screen indication that you are
viewing output data.
Below, we can see the input data in the time domain.
Similarly, we could push the
output
button and see the signal that was transmitted by the analyzer. If we
zoom in on the transmitted waveform (by dragging to the region we want to see using the left mouse
button), then we see the output waveform has 3 distinct regions.
