QuadroE1/T1 Manual I: Installation Guide
Configuring the Quadro E1/T1
QuadroE1/T1; (SW Version 3.2.x)
38
Fig. I-33: Call Routing example
Your PSTN Service Provider supplies you with a set of PSTN telephone numbers for your
E1/T1 line. If you want to assign these numbers to the phones connected to the Quadro2x
and Quadro4x within your Private Data Network, you have to create a dial plan to define Call
Routing paths on the QuadroE1/T1 and on each of the other Quadro devices.
To illustrate the dial plan with an example, we will assume, you have the phone number set
854603-30 to 854603-59 and you assigned the numbers as follows:
Quadro 2x (IP: 10.20.30.10) Quadro4x
(IP: 10.20.30.20) QuadroE1/T1
(IP: 10.20.30.30)
Auto Attendant
854603-30
Auto Attendant 854603-40 Extension
1
854603-50
Extension 1
854603-31
Extension 1
854603-41
Extension 2
854603-32
Extension 2
854603-42
Extension 3
854603-43
Extension 4
854603-44
Auto Attendant:
All numbers of the numbers set,
that are not assigned to an ex-
tension are caught here
All unassigned numbers of the phone number set will lead to the Auto Attendant of
QuadroE1/T where a message may inform the callers that the dialed number does not exist.
Fig. I-34: Call Routing example; dialing plan
Summary of Contents for QuadroE1/T1
Page 1: ......