Quadro QuadroE1/T1 Installation Manual Download Page 13 | Manualshive

Page: 13 / 54

background image

QuadroE1/T1 Manual I: Installation Guide

Configuring the Quadro E1/T1

QuadroE1/T1; (SW Version 3.2.x)

13

Basic Configuration

Two Configuration Wizards are available to accomplish the basic configuration of Quadro
devices:

•

The System Configuration Wizard - a tool for the administrator to define the

Quadro's Local Area Network settings and to specify regional configuration set-
tings to make Quadro operational in its LAN. It must be run upon Quadro first
startup.

•

The Internet Configuration Wizard - a tool for the administrator to configure the

WAN settings and to adjust Quadro's connectivity in the global network. It must be
run if Quadro is desired to be connected to the Internet.

Please Note

: It is strongly recommended that factory default settings are left unchanged if

their meanings are not completely clear.

Run the System Configuration Wizard

Open the System Configuration Wizard by selecting the corresponding menu item on the
System menu. The page Getting Started will be displayed:

Fig. I-7: System Configuration Wizard

This first page of the System Configuration Wizard is for information only and lists the items
to be configured, Click on the Next button to get to the System Configuration page.

«
...
11
12
13
14
15
...
»

Summary of Contents for QuadroE1/T1























































Reviews:

No comments

Related manuals for QuadroE1/T1

Brand: XAVI Technologies Corp. Pages: 51

Brand: OlenCom Pages: 299

Brand: Cellio Pages: 9

fieldserver EZ Series

Brand: MSA Pages: 61

Brand: ZyXEL Communications Pages: 18

Brand: Microhard Systems Pages: 186

ZyWALL USG 2000

Brand: ZyXEL Communications Pages: 120

Brand: CHIYU Pages: 38

Brand: Nokia Pages: 107

Brand: AMI Pages: 11

Brand: Siemens Pages: 12

Brand: HOOC Pages: 18

Brand: Velleman Pages: 84

Brand: SolarEdge Pages: 49

Brand: NETGEAR Pages: 2

Brand: NETGEAR Pages: 76

Brand: Netgate Pages: 58

NexusWay 800 Series

Brand: Neteyes Pages: 118

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands