QuadroE1/T1 Manual I: Installation Guide
Configuring the Quadro E1/T1
QuadroE1/T1; (SW Version 3.2.x)
28
The value for Switch Type depends on the CO when acting in the User mode and the pri-
vate PBX capabilities when acting in the Network mode.
Attention:
A timeslot can be used either for voice or signaling data transfer. The configura-
tion prevents the selection of a timeslot from the B channel list if it has already been selected
from the D Channel receive/transmit drop down list.
Incoming Called Digits Size indicates the number of received digits (in a range from 0 to
255) required to establish a call. When field has 0 value, the system uses either the timeout
defined in the T302 field or the Sending Complete Information Element messages to es-
tablish a call. Independent from the value in this field, Sending Complete Information Ele-
ment and pound sign always cause call establishment.
The Generate Progress tone on IP checkbox selection will generate the progress tone to
IP (H.323 or SIP).
Select the Generate Progress Tone to PSTN/PBX checkbox to make Quadro generate ring
tones to incoming callers during E1/T1 call dialing. This feature is mainly applicable to 2-
stage dialing mode.
Selecting the Enable CLIR Service checkbox enables the Calling Line Identification Restric-
tion (CLIR) service which displays the incoming caller ID only if Presentation Indication is al-
lowed on the remote side. Otherwise, if the CLIR service is disabled, the caller ID will be un-
conditionally displayed.
Summary of Contents for QuadroE1/T1
Page 1: ......
