![background image](http://html1.mh-extra.com/html/quadro/quadroe1-t1/quadroe1-t1_installation-manual_3366442014.webp)
QuadroE1/T1 Manual I: Installation Guide
Configuring the Quadro E1/T1
QuadroE1/T1; (SW Version 3.2.x)
14
System Configuration
Enter into the Host Name field a unique name for the QuadroE1/T1. This is useful when
many Quadro’s are part of a network and one administrator has remote access to all of
them. All Web Management pages show this Host Name in the top right corner.
For a basic configuration, leave the default LAN IP address. If you want to change the de-
fault LAN IP address, e.g. in order to integrate the device into an existing LAN, insert the
new LAN IP address into the IP Address text field and have it handy. You need it to re-
access Quadro management.
Fig. I-8: System Configuration page
Clicking on Next shows the page DHCP Settings for the LAN Interface
DHCP Settings for the LAN Interface
If the DHCP server is enabled, the QuadroE1/T1 will assign dynamic IP addresses to the
Admin PC connected to its LAN port.
If you didn’t change the default IP address of the QuadroE1/T1, you may also leave the de-
fault values for IP Address Range. Make sure your connected Admin PC belongs to the
same network as the LAN port of your QuadroE1/T1.
Please Note
: Make sure there is only one DHCP server on the LAN. Otherwise, unpredict-
able network behavior can occur.
Summary of Contents for QuadroE1/T1
Page 1: ......