70
RECHARGING THE BATTERY
The vehicle uses a sealed battery (maintenance free). Use a battery charger with a low amperage for
motorbikes for recharging purposes.
Do not attempt to remove the caps of the battery because you might damage it.
•
Remove the battery from its housing.
•
Recharge using a current equal to 1/10 the rated current of the battery for 5/10 hours.
Battery voltage:
12V
We recommend that the above operations are carried out at an authorised Quadro dealership
or by qualified personnel
Fig. 01
QSI0052
6.9 - FUSES
To access the fuses, turn the key-controlled switch to the seat open-
ing position and once it is open remove the fuse cover in the helmet
compartment.
Before replacing the damaged fuse, look for and remove
the fault and do not try to repair the fuses. Do not use
fuses with an amperage different from that specified.
QSI0054
1. 30A Battery charger circuits
2. 15A General
3. 10A Lights
4. 10A EFI
5. 5A Ignition coil
6. Spare
(Fig. 01)
VEHICLE MAINTENANCE
Summary of Contents for 3 2016
