![background image](http://html1.mh-extra.com/html/quadro/3-2016/3-2016_user-manual_3386981049.webp)
47
Fig. 01
QSI0036
Fig. 02
QSI0037
You must not remove the cap indicated
on both cylinders. If the cap is removed
there is a risk the gas will escape, thus
damaging the HTS system.
You must not remove cap «1 - Fig. 01» on the central suspension
cylinder. If the cap is removed there is a risk the gas will escape,
thus damaging the HTS system.
Periodically clean and protect the chrome-plated parts of the
cylinders with special products.
4.24 ADJUSTING THE DAMPERS
The rear dampers are fitted with an adjustment screw to regulate the
preload. According to the weight, turn the ring nut «
2
» in such a way as
to define the best running conditions. The lowest position corresponds
with the maximum preload ( pas luggage), while the
highest position corresponds with preload (just the driver).
The use of the vehicle with the wrong spring preload
could reduce the comfort of the ride and how precise
the steering is.
Regulate both the dampers with the same preload.
While regulating the dampers, wear gloves so as not to
get scratched or grazed.
(Fig. 02)
DESCRIPTION OF THE VEHICLE
Summary of Contents for 3 2016
