50
5.1 PRELIMINARY CHECKS
Fig. 01
Engine oil
Check level.
Final reduction oil
Check for leaks.
Coolant
Check level.
Braking system
Check that the control levers are not held down during function.
Check the oil level in the disc brake reservoirs and that there
are no leaks in the circuits. Check pad wear.
Throttle command
Check it opens and closes properly through the full rotation of
the handlebar.
Lights, tell-tale lights,
direction indicators
Check the proper functioning of the sound and visual devices.
Steering
Check the rotation is even, smooth and without play and loos-
ening.
Tyres
Check the correct inflation pressure, the state of wear and any
damage.
Central stand
Check it functions properly and the springs that take it to its rest
position are working.
Fuel tank
Check the fuel level, any leaks and that the cap is closed
properly.
Fasteners
Check that the fixing elements have not worked loose.
HTS System
Check the caps are on and that there are no leaks in the circuit.
To make sure vehicle functions perfectly,
always carry out the following checks before
setting off. Failing to do this could seriously
damage the vehicle and cause injuries to the
user(s).
QSI0002
Summary of Contents for 3 2016
