10
As shown in FIG’s 45 & 46, roll the
vertical plastic strip into the door
surround slot securing it to the door
surround. Next, starting at the driver’s
side front, attach the side belt rail into
the vehicle body by “rolling” the plastic
into the slot (FIG’s47 & 48).
Step 11: Securing the Side and Rear
Windows to the Vehicle
FIG 45
FIG 46
FIG 47
FIG 48
Note:
You may have to pull the
corners around towards the front or
back of the vehicle to center the top on
the vehicle.
Also, on the first install it
might be easier to release the front
header latches.
Repeat this on the
passenger side centering the top over
the rear bow.
Seal hook and loop around windows
(Fig 49 & 50)
FIG 49
FIG 50
Locate the Tailgate bar, corner mounts
and two short knobs (FIG 51). Locate
the driver’s side corner mount and
line up with the corner of the body tub.
With the short knob, secure the corner
mount to the body tube and tighten.
See Fig’s 52 & 53. Repeat this proce-
dure on the passenger side.
Step 12: Attaching the Corner
Mounts and Tailgate Bar
FIG 51
FIG 52
FIG 53
