Page 30
Quadra-Fire • Hudson Bay • 7003-121_R20 • 11/14
F. Positioning the Logs
While still breakable, the logs do not become fragile until
after the appliance is burned and they have cured. After
curing, any handling must be done with care as breakage
can easily occur.
PLEASE NOTE: Logs have been designed to work
specifically with the burner of this appliance. Exact
placement will ensure proper operation of your gas
appliance and reduce sooting.
Figure 8.10 -
Bend retaining tabs on the left and right sides
inward to hold brick in place.
Figure 8.11 -
Install the rear brick. Slide it in at an angle and
place over the rear brick retainer. Hand bend retaining tabs
up to hold brick in place. Push baffle towards back of firebox.
Figure 8.12 -
NOTE:
For the Hudson Bay Free Standing the
upper rear brick retainer is used.
Reinstall the pilot shield with the screws removed in
Figure
8.6
. The pilot shield must be in place before operation of
appliance.
Figure 8.13 -
Log Set
Figure 8.14 -
Logs shown installed in firebox. Logs #1 and #2
are part of the burner pan and are numbered for reference
only.
Figure 8.15 -
Install the left rear log (#3) over the locator pins
in the burner pan.
2 retaining tabs
on right and left sides
Rear brick retainers
#3
#4
#6
#5
#3
#1
#2
#6
#5
#4
