August
13,
2018 7061-197P
17
Explorer II
B. Blower (Optional)
Tools Required:
#2 Phillips head screwdriver
1. Locate bolts supplied with the blower.
2.
Align holes in mounting flange of blower with bolt holes
in appliance. Blower should be positioned at bottom of
rear outer skin as shown in
Figure 17.1
3. Re-insert and tighten bolts, securing blower onto outer
wall of appliance.
4. Place the bracket containing the snap disc and magnet
under the bottom left rear corner.
See
Owner’s Manual
for detailed operating instructions for
the blower and snap disc.
Figure 17.1
Shock Risk
.
• Do NOT remove grounding prong from plug.
• Route cord away from appliance.
• Do NOT route cord under or in front of
appliance.
• Plug directly into properly grounded 3 prong
receptacle.
CAUTION
Mounting Holes
and Screws
The convection air top assembly can be raised to redirect
air over the top of the appliance by removing 4 screws
and lifting assembly to align with upper mount holes and
reassemble
(Figure 17.2)
.
NOTE:
This option is not available for horizontal installs.
Figure 17.2
