22
06/21
7022-801H
CASTILE INSERT
E. Surround & Trim Set
1.
Lay surround face down on a flat protected surface to
prevent scratching.
2. Using the Phillips head screwdriver attach the side
surrounds to the top surround using 2 sheet metal
screws provided with the kit on each side.
3. Assemble the trim with the two corner
brackets provided.
4. Slide the assembled trim over the assembled
surround set.
5.
Remove the cast sides before attaching the surround
and trim. Lift up the top to expose the thumb screws
that secure the cast sides. Remove the thumb screw
and top bracket and then remove the cast side.
Back of Top Panel
Back of Side Panel
Screws
Figure 22.2
12 in
[305mm]
Figure 22.1
Figure 22.4
Thumb
Screw
Bracket
Surround Set
attaches to top
and bottom of
insert sides.
Figure 22.3
NOTE:
The right cast side bracket has the hopper cut out
switch attached. Remove the retainer from the
right side and allow to hang down into the insert
or disconnect the switch when removing side.
6.
Install the power cord in the surround.
-
If power enters the appliance on the right side:
Using the pliers, attach cord restraint 12 inches
from the female end of the cord and then press into
the right side panel (
Figure 22.1).
-
If power enters appliance on the left side:
The
cord will have to be routed through the back of
the insert. When routing the power cord, keep
cord lying flat as possible, keeping the cord away
from all exhaust surfaces and moving parts. After
routing, install cord restraint and press into the left
side panel.
7. Slide surround over the top of the insert into
place.
Surround attaches to bottom and top of insert sides
with the supplies 1/4 inch screws.
8. Plug cord into inlet on junction box routing the wire.
9. Install plug into unused hole.
Summary of Contents for CASTILEI-MBK-C
Page 28: ...28 06 21 7022 801H CASTILE INSERT Date of Service Performed By Description of Service ...
Page 29: ...29 06 21 7022 801H CASTILE INSERT Date of Service Performed By Description of Service ...
Page 30: ...30 06 21 7022 801H CASTILE INSERT Date of Service Performed By Description of Service ...
Page 31: ...31 06 21 7022 801H CASTILE INSERT Date of Service Performed By Description of Service ...
