28
February 19, 2020
7037-801B
G. Blower (Optional)
1.
Locate bolts supplied with the blower.
2.
Align holes in mounting flange of blower with bolt holes
in appliance. Blower should be positioned at bottom of
rear outer skin as shown in
Figure 28.1
3.
Re-insert and tighten bolts, securing blower onto outer
wall of appliance.
4.
Place the bracket containing the snap disc and magnet
under the bottom left rear corner.
See Owner’s Manual for detailed operating instructions for
the blower and snap disc.
Figure 28.1
Snap Disc
Bracket
with
Magnet
Secure wires
with wire tie
MANUAL
FAN
AUTO
LOW
HIGH
OFF
MANUAL:
Over-rides
the Snap
Disc
AUTO: Fan
will turn
ON/OFF
Automatically
by the Snap
Disc
Controls
the Fan
Speed
Shock Risk.
• Do NOT remove grounding prong
from plug.
• Route cord away from appliance.
• Do NOT route cord under or in front
of appliance.
• Plug directly into properly grounded 3
prong receptacle.
CAUTION
