4100-I ACT Wood Insert
Page 18
April 19, 2010
R
250-7201F
Panel Set And Cast Trim Set
1.
Remove contents from box being careful not to scratch
or damage cast trim pieces.
2. Lay the panel set face down on protective covering to
prevent scratching the painted surface.
. Secure panel set together with screws provided.
Figure 18.1.
Included in Panel Kit:
(2) side panels, left and right; (1)
panel top; (2) trim pieces; (1) trim top; (1) fastener package.
Included in Cast Trim Kit
: (2) cast trim legs, left and right;
(1) cast trim header; (2) cast trim footers, left and right.
Tools Needed:
Powered Phillips head screwdrive
r
NOTE: panel and cast Trim must be
ordered separately.
1. Screw side panels
to top panel
2. Bend tabs
. Install Cast T
rim
Header
2. Bend tabs
Ta
b with screw hole to
secure panel to insert
Secure side panels to insert with screws
Figure 18.2
-
Completed view
Standard Size:
30-1/2” h x 44-3/4”w
Large Size:
34”h x 48”w
Basic Standard Size:
30”h x 40”w
Panel And Gold Trim Set
1. Repeat Steps 1 - above.
2. To assemble the trim, attach the 2 side trim pieces
to the top trim at each corner using the “L” bracket
included in fasteners package.
Figure 18.3
. Slide panel and trim over top of the insert and into
position.
Ta
b with screw
hole to secure
panel to insert
Screw side
panels to top
panel
View of "L" Bracket
installed
4.
Now bend the tabs down toward the backside of the panel
set, on top piece and on each leg. Leave panel set face
down.
5. P
lace the corresponding cast trim pieces (2 cast trim legs
and 1 cast trim header) underneath panel set, also face
down.
6. Place washer provided over tab and secure the trim and
panel together with screw. Continue for all tabs.
7. Secure cast footers with screws.
CAUTION:
DO NOT PICK UP ASSEMBLED UNIT BY
CORNERS. IT IS TOO HEAVY AND MAY DAMAGE THE
PANELS. PICK UP FROM CENTER.
8. Slide assembled panel and trim over top of the insert
into place.
9. Secure panels to insert with 8-2 sheet metal screws
through tabs on bottom lower inside corners on side
panels.
Figure 18.2.
Figure 18.1
Figure 18.3
Figure 18.4
