Hardware installation manual
Qtech Platform 2U Server Product Technical Manual
35
www.qtech.ru
5. Reverse the sequence of this process to remove the heat sink.
3.2.
6. If you use an active cooling fan, please connect the fan power cord to the
motherboard socket marked as CPU0_FAN/CPU1_FAN.
Memory installation
NOTICE: Be careful when installing or removing DIMM modules to prevent any possible
damage to the DIMM or slots.
Should pay attention to the memory of the gap with the DIMM slot gap, each DIMM module
vertically snap into place to prevent the incorrect installation.
The memory slot shall be aligned with that of DIMM slots; insert each DIMM module straight in
place to prevent improper installation.
To install a memory module in a single CPU setup, install the memory module in slot A1 or D1.The
recommended settings are shown in Table:
note
:
1. Refer to the memory compatibility list on Gooxi official website to select.
2. To install a memory module under a single CPU setting, install the memory module in
slot A1 or B1.
