Hardware installation manual
Qtech Platform 2U Server Product Technical Manual
207
www.qtech.ru
Figure 2-117 Confirm Erase
Clear disk RAID information:
This function is used to clear the RAID residue information in the disk so that the disk can be
reused to configure RAID. This feature is commonly used for disks that have the Unconfigured
Bad mode.
1.
Switch the disk mode Unconfigured Bad to Unconfigured Good.
2.
As shown in Figure 2-118, in the Foreign View interface, select the RAID card, press F2, select
Foreign Config->Clear, and press Enter.
Figure 2-118 Select Foreign Config->Clear
