manualshive.com logo in svg

QSI QS-2plus!, Manual

Share
Download
QSI QS-2plus! Manual Download Page 76

u

Section 6 RESET Feature Guide

76

 #28: Passenger or Freight Announcement
(PFA)  or QSI Station Master (QSM) Enable

PFA (Passenger/Freight Announcement) or QSM (QSI Station Master) are
sounds and engine behaviors that can be run from your transformer whenever
the train comes to a stop. All QS-2+ sound sets include "The Northbound
Express" station announcement. ProtoSound systems converted to QS-2+ keep
their original Passenger Proto-Effects™ or Freight Yard Proto-Effects™
sounds.

In stations, PFA includes arrival and departure messages ("Now arriving on
track one, The Northbound Express…Watch your step…Baggage to the
right…Now departing on track one…") and ends with the traditional "All
Aboard!" as the train departs. In yards, ProtoSound engines with Freight Yard
Proto-Effects use freight yard loading and unloading sounds. As either
announcement is being made, the locomotive goes through a series of typical
engine sounds and behaviors.

When enabled for QSM, the engine goes through all the engine sounds and
behaviors it makes when it is in PFA, but the passenger station or freight yard
announcement is not heard. This lets you run the engine with another MTH or
QS-2+ equipped engine that is programmed to make a station or freight yard
announcement, and not have both engines "talking" at once. QSM is also used
with passenger sets equipped with QSI Station Announcement.

The factory default setting is "Enabled for PFA."

    T o   E n a b l e   o r   D i s a b l e   P F A

•

 

Find RESET Position #28

•

 

Press the Horn Button

Each time you press the horn button you will hear one to three "dings."

1 "ding" = "Disabled"

2 "dings"  = "Enabled for PFA"

3 "dings"  = "Enabled for QSM"

Press horn button to enable or disable PFA and QSM

ding, ding…

Summary of Contents for QS-2plus!













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands