QSI QS-2plus!, Manual

Page: 72 / 140

u
Section 6 RESET Feature Guide 72
•
Turn up the throttle until the engine moves forward at the speed at
which you want to hear the mid chuff rate (about eight chuffs per
second; the maximum rate is 16 chuffs per second)
You will not hear any chuff sounds yet.
•
Press and release the Horn Button
You will hear three "dings" and your engine will start to chuff. You have now
set the chuff rate. You can review the new chuff threshold and chuff rate by
running your engine in forward at low and high speeds, using the throttle. If
you interrupt the power, the engine will not change direction. If you decide to
turn the power off, do not leave it off for more than a few seconds (see note
below).
••
Press and release the Horn Button to stop the engine
You will hear four "dings." If you liked the chuff settings you heard, lock in the
settings by moving to the next RESET Feature, or interrupting the power and
leaving RESET. If you did not like the chuff settings, press the horn button
again. You will hear one "ding" and you can now start over with the first
setting.
Press Horn Button to stop engine
Note: If you decide to leave this RESET Position before completing the setting
changes, do a Hard RESET: turn the power off for 15 seconds or more, then
power up again. The engine will return to the original settings.
ding, ding, ding
ding, ding, ding, ding
Press the horn button again to set the high
chuff rate