manualshive.com logo in svg

QSI QS-2plus!, Manual

Share
Download
QSI QS-2plus! Manual Download Page 39

Section 5 Assigning and Using ID Numbers

u

39

When you are finished, clear the Temporary ID numbers using RESET Position
#3. This allows all the engines to return to their original Road and Engine ID
numbers. Now put away each engine using its Road and Engine ID numbers.
Simply do a RESET, select engine (5,4) by its Road and Engine ID number,
and move it to the storage yard. All the other engines will remain silent. Repeat
with the last two engines.

Note:

 Remember we suggested reserving Road ID numbers 1 and 2 for use as

Temporary ID numbers? By reserving numbers 1 and 2, you can use these as
Temporary ID numbers whenever you want and have two low numbers that will
allow you to select each of your multiple-headed trains very quickly.

(3,3)

 (5,4)

(4,2)

Rumble

Rumble

Rumble

All engines assigned the same Temporary ID number run together

Use horn button to
select Temporary ID #1
engines

Summary of Contents for QS-2plus!













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands