Qsan Technology XCubeFAS 2026 Hardware Manual Download Page 91

Page: 91 / 101

XCubeFAS 2026

Hardware Manual

Support and Other Resources

Official

Document

UPPORT AND

THER

ESOURCES

6.1.

Getting Technical Support

After installing your device, locate the serial number on the sticker located on the side of the
chassis or from the XEVO ->

System

Maintenance

System Information

and use it to register

your product at

https://www.qsan.com/business_partnership

. We recommend registering your

product in QSAN partner website for firmware updates, document download, and latest news
in eDM. To contact QSAN Support, please use the following information.



Via the Web:

https://www.qsan.com/technical_support



Via Telephone: +886-2-77206355



(Service hours: 09:30 - 18:00, Monday - Friday, UTC+8)



Via Skype Chat, Skype ID: qsan.support



(Service hours: 09:30 - 02:00, Monday - Friday, UTC+8, Summer time: 09:30 - 01:00)



Via Email:

[email protected]

Information to Collect



Product name, model or version, and serial number



Operating system name and version



Firmware version



Error messages or capture screenshots



Product-specific reports and logs



Add-on products or components installed



Third-party products or components installed

Information for Technical Support

The following syst

em information is necessary for technical support. Please refer to following

for what and where to get the information of QSAN product.

Summary of Contents for XCubeFAS 2026





































































































Search results

Summary of Contents for XCubeFAS 2026

Reviews:

Related manuals for XCubeFAS 2026

Brands by name

Popular brands

Qsan Technology XCubeFAS 2026, Hardware Manual

Search results

Summary of Contents for XCubeFAS 2026

Reviews:

Related manuals for XCubeFAS 2026

Brands by name

Popular brands