XCubeFAS 2026
Hardware Manual
Quick Maintenance
© 2021 QSAN Technology, Inc. All rights reserved.
www.qsan.com
Official
Document
59
6.
Repeat the procedures above if there are other host cards need to be removed.
TIP
To ensure the system cooling, please install all dummy host adapter card
cages if host cards are removed.
Installing the Host Cards
The following content and images are detailed steps for installing a host card into the system.
1.
Remove the controller module first.
For detailed steps
of removing a controller module;
please refer to the chapter 4.1,
Removing / Installing the Controller Module
2.
Remove the dummy host card cage by loosening two screws of the dummy host card cage
and then take dummy host card cage from controller module.
Figure 4-22 Procedures of Removing the Host Card Dummy Cage
3.
Align the host card to the slot to be installed and then push all the way into the controller
cage until hear a “click” sound and make sure the host card is well connected with the
connector in the controller module.
