Copyright © 2007 -2011 All Rights Reserved by QOMO HiteVision.
www.qomo.com
120
3.2.2.4.3 Connecting the instructor’s keypad to the host receiver
:
To connect the instructor keypad to the host receiver, follow these steps:
(1)
Login to a class
:
To login to a class, follow these steps:
Under the NoHost screen, select “Login”
Right Soft Key
to login to your nearby class.
OR
1. Under the NoHost screen, press the
“Menu/OK” Key
to enter the main menu.
2. Select item “
Login
” to login into your class.
(2) Set Channel:
If the clicker does not automatically detect the right class you would like to attend, you may manually
set your clicker communication channel to the channel number that the class use. The class channel
number is the main receiver channel number set.
Note:
The main receiver channel can be set in the software. Refer to the software channel session.
To set the instructor clicker channel, follow these steps:
1. Under the NoHost screen, press the
Menu/OK Key
to enter into the main menu.
2. Select “
1.SetChannel
” submenu.
Under the “
SetChannel
” screen, enter a valid channel number.
(3) Login to the last same channel class:
To login to the last same channel class, follow these steps:
Under the NoHost screen, press the
Start Key
or Right Key
to directly log into the class
