Gigabit Network QoS Router
29
connection; when the network has been idle for a period of time, the
system will break the connection automatically. (The default time for
automatic break off when no packets have been transmitted is five
minutes).
Keep Alive:
This function enables the PPTP dial connection to redial automatically
when the connection has been disconnected. Users can set up the
redialing time. The default is 30 seconds.
After the changes are completed, click
“Apply”
to save the configuration, or click
“Cancel"
to leave
without making any changes.
Transparent Bridge
：
If all Intranet IP addresses are applied as Internet IP addresses, and users don’t want to substitute private
network IP addresses for all Intranet IP addresses (ex. 192.168.1.X), this function will enable users to
integrate existing networks without changing the original structure. Select the Transparent Bridge mode for
the WAN connection mode. In this way, users will be able to connect normally with the Internet while keeping
the original Internet IP addresses in Intranet IP configuration.
If there are two WANs configured, users still can select Transparent Bridge mode for WAN connection
mode, and load balancing will be achieved as usual.
