QNO FQR7203 User Manual Download Page 30

Page: 30 / 140

Gigabit Network QoS Router

PPTP

：

This option is for the PPTP time counting system. Input the user’s connection name and password issued

by ISP, and use the built-in PPTP software to connect with the Internet.

WAN IP Address:

This option is to configure a static IP address. The IP address to be

configured could be one issued by ISP. (The IP address is usually

provided by the ISP when the PC is installed. Contact ISP for relevant

information).

Subnet Mask:

Input the subnet mask of the static IP address issued by ISP, such as:

Issued eight static IP addresses: 255.255.255.248

Issued 16 static IP addresses: 255.255.255.240

Default Gateway

Address:

Input the default gateway of the static IP address issued by ISP. For ADSL

users, it is usually an ATU-R IP address.

User Name:

Input the user name issued by ISP.

Password:

Input the password issued by ISP.

Connect on

Demand:

This function enables the auto-dialing function to be used for a PPTP dial

connection. When the client port attempts to connect with the Internet, the

device will automatically connect with the default ISP auto dial

Summary of Contents for FQR7203













































































































































Search results

Summary of Contents for FQR7203

Reviews:

Related manuals for FQR7203

Brands by name

Popular brands

QNO FQR7203, User Manual

Search results

Summary of Contents for FQR7203

Reviews:

Related manuals for FQR7203

Brands by name

Popular brands