manualshive.com logo in svg

QNAP TS-639 Pro Turbo NAS, User Manual

Share
Download
QNAP TS-639 Pro Turbo NAS User Manual Download Page 160

 160 

 
6.

 

Click “Set Config” and enter the number of the maximum tasks you want to 
download at the same time (Default number: 3).  
Enter the maximum download rate (default value is 0, which means unlimited). 
Enter the maximum upload rate (default value is 0, which means unlimited). 
Enter the port range for Download Station (default range is 6881-6899). 
Check UPnP NAT port forwarding to enable automatically port forwarding on UPnP 
supported gateway (default is not checked). 

 

 

 

Protocol Encryption 

There are a number of Internet Service Providers (ISP) block or throttle BitTorrent 
connections for the high bandwidth it generates. By turning on “Protocol Encryption” 
your connections will not be distinguished by these ISPs as BitTorrent connections 
therefore are unable to block or throttle them and causing slow connections or even 
no connections. However some ISPs are starting to be able to identify these 
connections even if they were encrypted so users are suggested to check the Bad 
ISPs list on AzureusWiki and to consider switching to an ISP that does not perform 
BitTorrent traffic throttling or blocking. 

Summary of Contents for TS-639 Pro Turbo NAS



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands