manualshive.com logo in svg

QNAP QHora-322, User Manual

Share
Download
QNAP QHora-322 User Manual Download Page 48

5. Click OK.

QuRouter adds the router to the QuWAN topology.

Accessing QuWAN Orchestrator

1. Log in to QuRouter.

2.

Click 

 located on the taskbar.

3. Click Go to QuWAN Orchestrator. 

QuWAN Orchestrator opens in a new browser tab.

Configuring the QuWAN QBelt VPN Server Settings

QNAP allows you to use QuWAN Orchestrator to configure your hub devices as QBelt VPN servers. After

setting up a VPN server in the SD-WAN cloud solution, you can add multiple VPN users, and then clients can

use the QVPN Device Client to connect to the hub.

Note

You can only view the configured VPN server settings in QuRouter. To configure the

settings, go to QuWAN Orchestrator.

1. Log in to QuRouter.

2. Go to QuWAN > QuWAN QBelt VPN Server .

3. Click Go to QuWAN Orchestrator. 

QuWAN Orchestrator opens in a new tab.

4. Log in to QuWAN Orchestrator with your QNAP ID and password.

QHora-322 User Guide

Network Settings   

47

Summary of Contents for QHora-322














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands