QNAP QHora-322, User Manual

Page: 10 / 77

2. Installation and Access
This chapter provides specific hardware installation and router access steps.
Installation Requirements
Category Item
Environment • Room temperature: 0˚C to 40˚C (32˚F to 104˚F)
• Non-condensing relative humidity: 5% to 95%
• Wet-bulb temperature: 27˚C (80.6˚F)
• Flat, anti-static surface without exposure to direct sunlight, liquids,
or chemicals
Hardware and peripherals Network cable
Tools Anti-static wrist strap
Setting Up the Router
1. Place your router in an environment that meets the requirements.
For details, see Installation Requirements .
2. Power on the router.
For details, see Rear Panel .
3. Verify the power LED is yellow-green and the system status LED is orange.
For details, see LEDs .
4. Connect the router to the network and the computer.
For details, see Connecting the Router to the Internet .
5. Verify that the WAN interface LED is orange and the LAN interface LED is green.
For details, see LEDs .
6. Log on to QuRouter with the local account credentials or QNAP ID.
For details, see Binding the Router with a QNAP ID .
Connecting the Router to the Internet
1. Connect the router to the power source.
a. Connect the power cord to the router.
b. Connect the power adapter to the electrical outlet.
The router powers on.
2. Connect the router to the internet.
a. Connect an Ethernet cable to the WAN port of the router.
b. Connect the other end of the Ethernet cable to the ISP gateway or the modem.
3. Connect the router to the computer.
QHora-322 User Guide
Installation and Access 9