manualshive.com logo in svg

QNAP QHora-322, User Manual

Share
Download
QNAP QHora-322 User Manual Download Page 22

6. System Configuration

System

System Settings

Editing the Device Name

1. Log in to QuRouter.

2. Go to System > System Settings > Device Name Settings .

3.

Click 

. 

The Edit Device Name window appears.

4. Specify device name that consists of 3 to 15 characters from any of the following group: 

Valid characters: A–Z, a–z, 0–9

5. Click OK.

QuRouter updates the device name.

Restart, Reset, Backup, and Restore

QuRouter system settings allows you to remotely control the restart, reset, backup, and restoration

operations of the router.

Restarting the Router

1. Go to System > System Settings > Restart / Reset / Backup / Restore .

2. Click Restart. 

A confirmation message appears.

3. Click OK.

QuRouter restarts the device.

Resetting the Router

1. Go to System > System Settings > Restart / Reset / Backup / Restore .

2. Click Reset. 

A confirmation message appears.

3. Click I agree.

4. Click OK.

QuRouter resets the device to default settings and the router is unbound from QNAP ID.

Backing Up System Settings

1. Go to System > System Settings > Restart / Reset / Backup / Restore .

2. Click Backup.

QHora-322 User Guide

System Configuration   

21

Summary of Contents for QHora-322














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands