QMS 3260, Operation

Page: 96 / 194

+&4
&
/%
When a jam occurs, the message window on the control panel displays jam mes-
sages:
TRANSPORT JAM
,
OUTPUT JAM, FUSER JAM, DUPLEX JAM, FINISHER
JAM
. Frequent jams in any area indicate that area should be checked, repaired, or
cleaned. Repeated jams may also happen if you’re using the wrong weight print
media.
Misfeed jams occur in the standard tray, multipurpose tray, or optional
high-capacity input feeder. A misfeed jam may be as simple as a sheet of media
not being picked up, or it may be that the media was picked up but not fed prop-
erly. Access to this area is through the input trays.
Exit jams occur between the left side of the printer and the media exit areas.
Input and transport jams occur between the trays and the left side of the printer.
Duplex jams occur in the optional duplexer.
Envelope feeder jams occur at the optional envelope feeder input.