QMS 1725E, Getting Started Manual, Page: 59 / 94

Installing the Software
4-7 Connecting to an Ethernet Network
9 In the Installation of CrownNet Ports dialog box, select the
appropriate printer port(s) and choose Install.
The selected ports are displayed in the CrownNet Manager
window.
» Note: Port names are either the default or those chosen in “Interface
Configuration,” later in this chapter.
Workstation
Use this procedure to install the CrownAdmin software on the work-
station. CrownAdmin lets you use Remote Console; it is not neces-
sary for printing via OS/2.
1 With the workstation running, insert the disk containing the
CrownAdmin software for DOS or Windows in the disk drive.
2 Open a session under OS/2:
n
OS/2 version 1.
x
—Open a DOS Window session.
n
OS/2 version 2.
x
—Open a WIN-OS/2 session.
3 Refer to the DOS or Windows information elsewhere in this
section, “Software Installation,” for further instructions.
» Note: You can’t install the utilities by copying files from the disks. You
must run the installation program.
4 When the installation is complete, remove the disk from the
disk drive and store it in a safe place.
5 Skip to “Configuring the Interface,” later in this chapter.
UNIX
» Note: The procedure described here is for UNIX Host Software installation
from disk. If you have a cartridge or tape, refer to the installation
documentation accompanying the cartridge or tape.
1 Log on the UNIX system as root.