QMS 1725E, Getting Started Manual

Page: 36 / 94

Connecting the Power Cord
QMS 1725E Print System Getting Started 2-12
3 Insert the tab on the end of the media guide arm into the slot.
Lower the arm onto the top output bin.
Connecting the Power Cord
1 Plug one end of the power cord into the connector just below
the main power switch on the back of the printer.
2 Plug the other end of the power cord into a standard electri-
cal wall outlet (grounded AC outlet).
Turning on the Printer
1 Push in the | on the main power switch, located on the back
of the printer above the power cord.
Media guide arm
Tab