Driver
Problems
QMS 1660 Print System Operation
6-24
Toner Out Message Displays
If the Administration/Engine/Toner Out Act. option is set to Stop, you
can’t print when the
TONER OUT
message displays. Do one of the fol-
lowing:
n
Replace the toner cartridge.
n
Redistribute the toner in the cartridge and then set the Adminis-
tration/Engine/Toner Out Act. option to Continue. (Also order
another toner cartridge.)
While print quality will deteriorate, the printer will continue to print
about 100 more pages with the toner remaining in the cartridge.
Driver Problems
LaserWriter 8.x Driver Printing Problems
If you experience problems when printing with the LaserWriter 8.
x
driver, switch back to the LaserWriter 7.
x
driver that came with your
Macintosh (if available), or call the QMS Customer Response Center
(CRC). See appendix A, “QMS Customer Support,” for the telephone
number.
QMS Windows Driver Printing Problems
n
QMSPS.DRV—If you experience problems when printing with the
QMS-developed QMSPS.DRV Level 2 Windows driver, make
sure Enable PostScript Pass-through is enabled on the Options
tab of the printer setup utility.
n
QSCRIPT.DRV—If you experience problems when printing with
the QMS-developed QSCRIPT.DRV Level 1 Windows driver, try
using the Microsoft driver provided with Windows, along with our
a WPD file provided on the Windows Drivers disk included with
the printer. See the README file on the disk for information on
using a WPD.
Summary of Contents for 1660
