QMS 1660, Operation

Page: 66 / 122

Status
Messages
QMS 1660 Print System Operation 6-10
PRINTING STATUS A status page is printing.
PUT SIZE PAPER IN
ANY BIN
The Operator Control/Chain
Inputbins menu is set to On and
the chained cassettes are
empty. Refill an empty
cassette with the
specified size
media.
PUT
SIZE
PAPER IN
INPUTBIN BIN
The Operator Control/Chain
Inputbins menu is set to Off and
a media cassette (or the
multipurpose tray) is empty.
SIZE is the media size the
cassette is currently configured
for.
INPUTBIN
is the empty
cassette or multipurpose tray.
Refill the cassette
or multipurpose tray
with the specified
size media.
TEST PRINT A test print page is being
printed.
TONER ABSENT The toner cartridge is not
installed.
TONER OUT The toner cartridge is empty. Replace the toner
cartridge. Refer to
chapter 2, “Con-
sumables,” for
instructions.
WAITING FOR IDLE A job is in process. Access to
the menu is not allowed until
the job is finished. Wait until the job is
finished and the
printer goes idle to
access the configu-
ration menu.
WAITING ON INPUT
END JOB? The compiler is waiting on
incoming data for the first job in
the queue. The job may not
have an end-of-job indicator
and therefore can’t end. The
message clears if more input
arrives from the port or if you
press the Cancel key. No other
jobs can be printed until this job
has ended. Cancel or end the
print job.
WARMING UP The printer is warming up. Wait until the
IDLE
message displays
before printing.
This message... means... Do this...