- 35 -
follows:
① ②
④ ③
A
B
1
、
Fill a pan of proper size with
incombustible
cleaning
solution. Immerge the filter
element
in
the
cleaning
solution and wash it.
2
、
Press the filter element with
both palms to squeeze out
cleaning solution. Never twist
the filter element to avoid
damaging.
3
、
Soak the filter element in
engine oil tank and squeeze oil
out, keeping it slightly wet.
Precaution
：
Before and during cleaning,
attention should be paid to check
the filter element for any crack.
Replace it if any crack is found.
4
、
Reinstall the filter in reverse
order. Make sure the filter
element is firmly fixed in
correct position and reliably
sealed.
Cleaning of paper filter element
Cleaning method is as follows:
1
、
Remove the left side guard
board.
2
、
Remove the tensioning band
screw of air filter connector. Pull
out the intake pipe and separate it
from the filter.
3
、
Take out the filter element
4
、
Pat the filter element while
rotating it, to remove dust, and
blow off remaining dust by using
compressed air.
5
、
The filter element is made of
paper and cannot be cleaned
by using any oil-based agent.
Precaution
：
Before and during cleaning,
pay attention to check the filter
element for any contamination,
crack or damage. Replace it with a
new one when necessary.
Reinstall the filter in reverse
order. Make sure the filter element
is firmly fixed in correct position
and reliably sealed.
Precaution
：
Never
start
the
engine
without the air filter installed. The
air filter element must be cleaned
or replaced more frequently if the
motorcycle is used in dusty
conditions. Never start the engine
without the filter element installed,
or the engine wearing may be
increased. Be sure to the air filter
element is in good working
conditions, because this part is
very important to engine service
life.
