- 8 -
lamp. After lane change or turning,
timely turn the signal light OFF.
Horn button
③
Press "
" button and the
horn will sound.
Right handlebar control system
Engine shutdown switch
①
The switch is a rocker switch,
located on the tip of right
handlebar control panel, with the
rockshaft at the center of the
rocker. When it is pressed in "
"
start position, the switch is turned
and the engine can be started. It is
an emergency switch.
If the switch is pressed in "
"
position, the starting circuit is
completely cut off and the starter
motor cannot be started. Do not
put the switch in this position
during driving.
Front brake grip
②
To apply front wheel brake,
slowly press the brake grip on the
right handlebar. As the motorcycle
adopts hydraulic braking
，
do not
press it abruptly or forcefully.
When the brake grip is
pressed, the brake light will be lit
automatically.
Electric start button
③
Press "
" button to turn on the
start
motor
circuit.
During
starting, put in neutral gear
position to cut off transmission
and guarantee safety.
Warning
：
The starter motor shall be
operated not more than 5 seconds.
Heavy
discharge
may
cause
overheat to circuit and starter
motor. If starting is failed after
several attempts, stop to check the
fuel supply system and starting
circuit
(refer
to
"Troubleshooting").
Lighting switch
④
"
" ON position When the
switch is turned to this position,
the head light, front position light,
instrument panel light and rear
tail light will be lit.
"
" parking light position
When the switch is turned to this
position, the front position light,
instrument panel light and rear
tail light will be lit.
"●" OFF position All the head
light,
front
position
light,
instrument panel light and rear
tail light go OFF.
Accelerator grip
⑤
Accelerator grip is used to
control the engine speed. To
