- 7 -
There
are
two
types,
three-position
as
showed
in
following sketches, to be used for
different models.
"
" (OFF) position
All circuits are disconnected
and the key can be removed.
"
" (ON) position
All igniting circuits are ON and
the engine can be started. The key
cannot be removed in this position.
“
” (Parking) Position (FIG1)
To park the motorcycle, turn
the key to “ ” position. In this
position, the key can be removed
and the tail lamps (parking lamps)
and front positioning lamps keep
ON for parking on roadside at
night.
WARNING
Before turn the key to “
”
position, park the vehicle with its
side stand or central stand in a
firm way.
“
“ Position (FIG2)
In
order
to
lock
the
handlebar, turn the bar to the left,
then insert the key. Rotate it
clockwise to full stop for locking
the handlebar.
WARNING
If the handlebar is locked, the
motorcycle is never pushed any
longer; otherwise you will lose
balance.
Left handlebar control system
Clutch grip
①
To start the engine or make a
gear shifting, press the grip to
release the drive system and cut
off the clutch.
Dimmer switch
②
When dimmer switch is turned
up to "
" (high beam) position,
the head light is in high beam and
the high beam indicator lamp on
the instrument panel is lit. On
contrary, when it is turned down
to "
" (low beam) position, the
low beam is lit.
Turning signal operation When
the switch is turned to left "
"
position, the left turning signal
lamp is lit and the indicator lamp
on instrument panel flashes. When
the switch is turned to right "
" position, the right turning signal
lamp is lit and the indicator lamp
on instrument panel flashes.
Warning:
Whenever you are going to
change lane or make a turning,
timely turn ON the turning signal
