Qianjiang QJ150T-10, Operation And Maintenance Manual, Page: 40 / 131

- 39 -
螺栓
1.6 Charge coil of the alternator
*Note
Inspection of the charge coil of alternator
may be conducted on the engine.
Inspection
Disassemble the 6P joint of alternator.
Measure the resistance value between the white coil of
alternator and the motorcycle frame with an avometer.
Standard value ： 0.6-1 Ω （ 20 ℃ ）
If the measured value exceeds the standard value, replace the
alternator coil.
1.7 Disassembly of alternator
1.7.1 Disassembly
Disassemble the body guard.
Fix the flywheel with a multiple use fixing spanner.
Disassemble the flywheel fixing bolt.
Remove the flywheel with a flywheel puller.
Disassemble the retaining key.
Disassemble the lead connector of the alternator.
Disassemble the alternator stator.
1.7.2 Installation
Install the alternator stator to the engine case.
Connect the lead connector of the alternator.
Clean the tapered part of the crankshaft and flywheel.
Install the retaining key of flywheel in the key groove on the
crankshaft and confirm.
Align the flywheel groove with the retaining key of the shaft.
*Note
Fix the flywheel with a multiple use fixing spanner and screw
the fixing nut.
Torque value ： 9.0 N·m
Install the left body guard.
Confirm no bolts are on the inner face of the flywheel
because of magnetism of the inner face.
螺栓
bolt
bolt