Multi-Pointer
Service Manual
Page 10 of 26
Fig. 8
5. Screw off four cross plate screws M2.5×6 (5-10) by a cross screwdriver. Take apart
the baseboard part and base part (5-12) (see Fig.8).
4.3
Core
part Disassembly
(As shown in Fig. 9, Fig. 10 and Fig. 11)
Fig. 9
1. Using an electric iron to cut off the four
connections between
the hairspring board
module1 (5-6-1) and 2 (5-6-3). Take off the hairspring board module1 (5-6-1).
2. Screw off two cross plate screw M2×5 (5-6-2). Take off the hairspring board module
2 (5-6-3) (see Fig.9).
