Multi-Pointer
Service Manual
Page 8 of 26
4.1 Complete Disassembly
(As shown in Fig. 2 and Fig. 3)
Fig. 2
Fig. 3
1. Open the battery door (4), take out 3 AA battery;
2. Screw off a cross plate screw M2.5×10 (1) by a cross screwdriver, take off the
knob1 (2);
3. Using a cross screwdriver to screw off four sink screws M2.5×12 (6) through the
bottom aperture (7) (as sown in the Fig.2). (You can screw off a screw per rotating
90
o
)
4. Draw the power plug and indicator light plug connected with the main circuit board
module and house part. You can take apart the house part (3) from the main part
(5). (See Fig.3)
