Multi-Pointer
Service Manual
Page 11 of 26
Fig. 10
3. Screw off four cross plate screws M2×12 (5-6-4),
take apart the gimbal module (5-6-5).
4. Screw off the inner hexagon tightening screw M3×3 (5-6-7) by an inner hexagon
spanner. Screw off the pendulum module (5-6-6) (see Fig. 10).
Fig. 11
5. Using an electric iron to cut off all connections between the laser source and the
transferring board (eight pieces in all).
Screw off two cross plate screws M2×4(5-6-8). Take off the transferring board
module (5-6-9);
6. Screw off four cross plate screws M2×8(5-6-10),
take out the prism module (5-6-11);
7. Screw off four cross plate screws M2×8(5-6-12), taking apart three same laser
sources respectively1 (5-6-13);
8. Screw off four cross plate screws M2×8(5-6-14), taking apart the laser source
module1 (5-6-13) (see Fig. 11)
