Multi-Pointer
Service Manual
Page 12 of 26
4.4 Baseboard part Disassembly
(As shown in Fig. 12, Fig. 13 and Fig. 14)
Fig. 12
1. Screw off four cross-sink screws M2.5×5(5-11-2), take apart four connecting poles
(5-11-1)
Note: There are two kinds of connecting pole.
Two poles with M2 screw eyes are in the front. (see Fig.12)
Fig. 13
2. Screw off two cross plate screws M2×3(5-11-3).
Take off the buzzer module (5-11-4);
3. Screw off three plate screws M2×6 (5-11-5).
Take off the partition ring (5-11-6) (see Fig.13)
