QED LANDTEC i-Q Series, Operation Manual

Page: 42 / 51

Operation Manual
GEM and GEM PRO
OMiQGEM-L Issue.02
Page 42 of 51
11) Using Phillips No. 1 screwdriver, secure the battery pack in place.
Figure 20 – Battery Fitting
12) i-Q is now ready to be switched on and used – see Starting the i-Q .
Note: If the PMMPB battery is removed, the backup coin cell will maintain time/date settings and CO (H
2
compensated) cell conditioning for approximately 10 minutes. After this time, the user will have to reset the time
& date and CO (H
2
compensated) cell conditioning will be affected, meaning the user may need to allow the cell
to stabilize for 24 hours before use.
Note: It is the operator’s responsibility to keep a record of when and what maintenance has been performed.
Note: In the event of malfunction or damage, please contact QED or an authorized representative.
Note: For further information please contact Technical Support at QED on:
AFFINITY
BATTERY REPLACEMENT
The batteries in Affinity are user replaceable. When the batteries are getting low, the LED on the Affinity keypad
will flash red slowly (see annotation 1 on
Figure 21 ). When the battery is critically low, the LED in the Affinity
keypad will flash red rapidly.
QED Environmental Systems Ltd.
+44(0)333 800 0088
technical@qedenv.co.uk
QED Environmental Systems, Inc.
+1 (800) 624-2026
service@qedenv.com
iQV14