QED LANDTEC i-Q Series, Operation Manual, Page: 27 / 51

Operation Manual
GEM and GEM PRO
OMiQGEM-L Issue.02
Page 27 of 51
•
Read Safety Data Sheets (SDSs) to know the specific hazards of the gases you are using.
•
Ensure that users are adequately trained in the safety aspects of the gases being used and appropriate
procedures are followed.
•
Store hazardous gases in approved containers, and dispose of empty cylinders according to applicable
guidelines.
•
Ensure hazardous gases are exhausted from the instrument to an area where it is safe to discharge the
gas.
•
Hazardous gases may be exhausted from the instrument when purging with clean air. Ensure gases are
exhausted to an area where it is safe to do so.
Figure 7 best describes the setup for connecting an i-Q instrument to a QED Wellhead with QED Orifice Plates.
Note: Other wellheads and flow devices may require a different setup arrangement. For further information
please contact Technical Support at QED on:
QED Environmental Systems Ltd.
+44(0)333 800 0088
technical@qedenv.co.uk
QED Environmental Systems, Inc.
+1 (800) 624-2026
service@qedenv.com