QED LANDTEC i-Q Series, Operation Manual

Page: 16 / 51

Operation Manual
GEM and GEM PRO
OMiQGEM-L Issue.02
Page 16 of 51
AFFINITY (WIRELESS PROBE)
To prevent fire and explosion:
•
Do not open in a hazardous or potentially explosive area.
•
Eliminate all ignition sources; such as pilot lights or cigarettes.
•
Only use AA Type Energizer
®
L91 batteries.
•
Do not attempt to charge non-rechargeable batteries, for example, the Affinity batteries.
Various peripherals can be connected to Affinity to measure different parameters, but these peripherals may not
be certified or certified appropriately for use in potentially explosive atmospheres. It is the responsibility of the
operator to determine the protection concept and classification of equipment required for a particular
application and whether these peripherals are suitable for use in a potentially explosive atmosphere.
The instrument has been designed to be used with peripheral accessories that can be connected to the three
connection sockets on Affinity, namely Temperature Probe, Anemometer, and Humidity Probe. The entity
parameters for these sockets is as follows:
CONNECTION
Affinity connects to the i-Q Series by Bluetooth. To turn Affinity on, press and hold the power key, see
Annotation 2 on
Figure 5 – Affinity , for two seconds. Pairing is done through the i-Q instrument.
Connector Uo Io Po Ci Li Co Lo
A – Temperature Probe 5V 5mA 7mW 0µF 0mH 500µF 500mH
B – Humidity Probe 8.6V 16mA 33mW 2µF 0mH 499µF 500mH
C – Anemometer Probe 8.6V 3mA 6mW 0µF 0mH 500µF 500mH
iQV11